Case Study: Post-Construction Clean for Condor Properties

Condor Properties called us to get a freshly renovated commercial unit in Markham, just over 10,000 square feet, ready for a new tenant. We put a crew together, cleared out the construction dust, and handed back a space ready for move-in.

Client

Condor Properties

Space

Commercial unit, roughly 10,000+ sq ft, renovated for the incoming tenant

Location

Markham, Ontario

Service

Post-construction cleaning

Crew

4 cleaners

Timeline

Short notice, scheduled around the contractors' final visits

Areas cleaned

Kitchenette and millwork, counters, interior windows, floors, elevator, fixtures

The Challenge

The renovation was finished, but the unit wasn't ready for anyone to move into. Contractors had done good work on the space: new cabinetry, quartz counters, new flooring and a refreshed elevator. What they left behind was the usual layer of fine construction dust on every surface, debris in corners and cabinets, and protective film still covering the elevator doors.

Timing was the other challenge. Post-construction cleaning has to happen after the contractors are done, but contractors often come back for touch-ups and final fixes. That means the real start date usually isn't confirmed until the last minute, while the tenant's move-in date doesn't move.

Condor needed a team that could be ready on short notice and still deliver a unit that looked like what the tenant had been promised. First impressions on day one matter, especially when the landlord has just invested in upgrades.

The Approach

We kept a crew of four cleaners on standby so we could start as soon as the contractors cleared out. Once on site, we worked top to bottom, so dust coming down from high surfaces never landed on areas we'd already finished.

  • High surfaces first: upper cabinets, tops of millwork, light fixtures and ledges, using ladders to reach everything

  • Cabinetry inside and out: wiped down doors, handles and interiors so the tenant isn't unpacking into dusty shelves

  • Counters and fixtures: cleaned and polished the quartz counters, sink and faucet

  • Interior windows: cleaned glass, frames and sills, where construction dust and residue collect and show up as soon as light hits them

  • Elevator: removed the protective film and polished the stainless steel doors and frame

  • Floors last: thorough vacuuming to pull up fine dust, then a final wash of the new flooring

The Result

Condor got back a unit that looked the way the renovation was meant to look. Cabinets were clean inside and out, counters and fixtures were spotless, the windows were streak-free, the elevator was unwrapped and shining, and the floors were dust-free.

The tenant walked into a space ready to set up in, with nothing left over from the contractors.

Why it matters for property managers

A renovation isn't finished when the contractors leave. Construction dust settles for days and gets into places a quick wipe-down misses. If it's still there when the tenant arrives, that's the first thing they notice, not the new finishes.

Post-construction cleaning closes that gap. We've been cleaning buildings across the GTA since 1968, and we know how to get a space from "reno done" to "ready to lease" on your timeline, even when that timeline changes at the last minute.

Have a unit coming off a renovation? Reach out to M.C. Janitorial Systems and we'll get it move-in ready.

We leave behind shine and peace of mind

Next
Next

How Mixed-Use Malls in the GTA Have Different Cleaning Needs